Civil Chemicals
-
CC REPAIR MORTAR
₹ 40NON-SHRINK, HIGH STRENGTH REPAIR MORTAR
CC repair mortar is specially formulated repair mortar designed to fully meet the
requirement of effectively repairing cracks in plasters , avoiding the use of costly
sealants and putties. CC repair mortar is a dry powder when mixed with water it
forms a creamy consistency mortar which is ready for use in repairing cracks and
repairing plasters, CC repair mortar is reinforced with alkali resistant fibers. -
CC SBR LATEX
₹ 235It is polymer based on styrene butadiene rubber, specially formulated for use with cement formulations.
-
CC SYNTHETIC FIBRILLATED MESH FIBER
₹ 250CC FF is a Synthetic Fibrillated Mesh Fiber for concrete reinforcement that complies with Standard Specifications for Fiber Reinforced Concrete and Shotcrete, and is specifically designed to help mitigate the formation of shrinkage cracking in concrete. Typically used at a dosage of 0.9 kg/m3, CC FF have been shown to greatly reduce shrinkage cracking by as much as 83% when compared to plain concrete.
-
CC TILE GROUT
₹ 35POLYMER BASED TILE GROUT IN DIFFERENT COLOURS
CC tile grout is a polymer based cementitious tile joint filler used in filling gaps
and levels itself to give hard wearing, non-dusting tile joints -
CC TILO
₹ 260POLYMER BASED TILE ADHESIVE
CC tilo is blend of Portland cements, polymers and fillers. -
CC WAVED MACRO FIBER
₹ 375CC WF is a Waved Macro Fiber for concrete reinforcement that complies with Standard Specifications for Fiber Reinforced Concrete and Shotcrete, and is specifically designed to help mitigate the formation of shrinkage cracking in concrete. Typically used at a dosage rate of 4 kg/m3. CC WF has been shown to greatly reduce shrinkage cracking by as much as 85% when compared to plain concrete.
-
Concrete Cutting Machine with GX390 Honda Gasoline 13HP Engine (Electric start pushing manual type)
₹ 114,400 (Excluding GST & Delivery Charges)Electric start pushing manual type Depth cutting capacity 10mm to 180mm – Blade capacity 14” to 20” can be used – Without cutting Blade, petrol /per hrs – 3 to 3.5 litres
-
Concrete Cutting Machine with GX390 Honda Gasoline 13HP Engine without self start engine (Rope Start)
₹ 101,400 (Excluding GST & Delivery Charges)self start engine (rope start) Depth cutting capacity 10mm to 180mm – Blade capacity 14” to 20” can be used – Without cutting Blade, petrol /per hrs – 3 to 3.5 liters
-
Concrete Groove Cutting with 10 HP Crompton Motor
₹ 97,500 (Excluding GST & Delivery Charges)Depth cutting multipurpose machine WITH 10HP CROMPTON MOTOR (3PHASE), 40 LITRES REMOVABLE WATER TANK, 30 MTRS CABLE (4 sq.mm, 4core), BCH (OR) SIMENS DUAL STARTER, CUTTING DEPTH CAPACITY – 10mm to 220mm) BLADE DIA (14” to 20” CAN BE USED ) WITHOUT CUTTING BLADE
-
Concrete Groove Cutting with 7.5 HP Crompton Motor
₹ 80,600 (Excluding GST & Delivery Charges)Depth cutting multipurpose machine WITH 7.5HP CROMPTON MOTOR (3PHASE), 40 LITRES REMOVABLE WATER TANK
30 MTRS CABLE (4 sq.mm, 4core)
BCH (OR) SIMENS DUAL STARTER
CUTTING DEPTH CAPACITY – 10mm to 180mm)
BLADE DIA (14” to 18” CAN BE USED ) WITHOUT CUTTING BLADEDISC SIZE : 960MM X 3MM BLADE SIZE : 350 MM X 150MMX2 MM
-
Concrete Vacuum Dewatering Pump with 7.5HP 3Ph Motor
₹ 122,200 (Excluding GST & Delivery Charges)7.5 HP 3 PHASE CROMPTON MOTOR AND SIEMENS STARTER, FORWARD REVERSE SWITCH, 30 mtr CABLE (2.5 sq.mm,4core)
TOP MAT – 18” X15” – 1NO
FILTER MATT 2mtr X 4mtr- 2 NOS
SUCTION H0SE-12 mtrs
0UTLET H0SE – 6mtr -