Civil Chemicals Products

  • CC ANTI RUST

    0 out of 5
     300

    Water based Chemical release agent suitable for pretreatment of metal before applying any coating. On application of CC anti rust rusted surface gets cleaned easily and safely and leaves behind it an anticorrosive thin film of zinc on the treated surface. CC anti rust can be applied by brush.

  • CC COLLOIDAL SILICA CONCRETE FINISHING AID – SLAB ASSIST

    0 out of 5
     16,000

    Concrete surfaces treated with CC COLLOIDAL SILICA CONCRETE FINISHING AID are lubricated for faster and easier finishing and prolonged workability, even when conditions are unfavourable. (hot, humid, dry, and windy conditions.)

    A reactive colloidal silica finishing aid that provides a multitude of immediate and long-term benefits to freshly placed concrete. Concrete surfaces treated with CC COLLOIDAL SILICA CONCRETE FINISHING AID are lubricated for faster and easier finishing and prolonged workability, even when conditions are unfavourable. With 100% reactive technology, CC COLLOIDAL SILICA CONCRETE FINISHING AID yields concrete slabs with higher density, improved durability, and lower maintenance requirements.

  • CC CURE WB

    0 out of 5
     1,000

    WATER BASED CONCRETE COMPOUND

    The CC cure wb water based concrete curing compounds are liquid membrane type
    materials, available in several grades for specific purposes, as detailed above. All
    grades are basically composed of low viscosity wax emulsion, which incorporate a
    special alkali reactive emulsion braking system.

  • CC DIAMOND DOWELS PLATE & SLEEVE

    0 out of 5
     175

    Diamond dowels are in MS plate & sleeve. Dowels are suited for construction joints in concrete slabs and pavements. They transfer vertical loads across the joint and minimize differential deflection between adjacent slab panels under load.

    Including MS plate and plastic sleeve

  • CC FLOOR HARDENER

    0 out of 5
     520

    A RANGE OF IMPACT AND ABRASION RESISTANT OXIDISING AND NON-OXIDISING
    METALLIC FLOOR HARDENERS.

    A range of metallic and non-metallic floor hardening compounds based on well graded metallic and non-metallic aggregates, activating chemicals and selected Portland cements. This range of high quality compounds are for use in industrial concrete flooring to produce impact resisting, abrasion resisting, dust free surfaces which withstand spillages of oil, grease and certain industrial chemicals. Available in two types: They are used as a troweling in grade(broadcast or dry shake on green concrete) or as a thickness grade for incorporating the total thickness of the topping.
    CC floor hardener hd

    The general purpose product based on non-oxidising metallic aggregate used to produce an impact and wear resistant, dust free surface suitable for most heavy duty industrial situations, such as warehouses, car parks, garages and machine showrooms etc. Can be used in areas subject to constant wetting down either indoors or outdoors. This is not affected by oil/grease spillages and offers a non-slip surface.

    CC florhardener gp
    Based on non-metallic aggregate for locations and industries where it is important that the floor be free of any ferrous content but a high degree of durability is essential. For light to medium duty areas such as walk a ways, shopping centers, etc.

  • CC GROUT

    0 out of 5
     260

    HIGH STRENGTH, NON-SHRINK, FREE FLOWING, EXPANSIVE GROUT

    A specially prepared ready to use grey powder which requires addition of water
    and CC Bond Repair on site, to provide.

  • CC GUARD EX

    0 out of 5
     900

    ACRYLIC CO POLYMER BASED HARD WEARING WATERPROOF COATING
    CC guard ex is a ready to use two pack (white liquid and a pack grey cementitious
    powder) protective and waterproof coating membrane.

  • CC MICRO CONCRETE

    0 out of 5
     300

    A specially prepared ready to use grey powder which requires addition of water only
    on site, to produce a free flowing, high strength concrete which has micro fine
    aggregates and ability to penetrate into the recesses of concrete members and
    behind the reinforcement of the member under repair.

  • CC PROOF

    0 out of 5
     100

    “LIQUID INTEGRAL WATERPROOFING COMPOUND
    Helps in achieving water tight concrete and waterproof cement sand mortar and plasters”

  • CC REPAIR MORTAR

    0 out of 5
     40

    NON-SHRINK, HIGH STRENGTH REPAIR MORTAR

    CC repair mortar is specially formulated repair mortar designed to fully meet the
    requirement of effectively repairing cracks in plasters , avoiding the use of costly
    sealants and putties. CC repair mortar is a dry powder when mixed with water it
    forms a creamy consistency mortar which is ready for use in repairing cracks and
    repairing plasters, CC repair mortar is reinforced with alkali resistant fibers.

  • CC SBR LATEX

    0 out of 5
     235

    It is polymer based on styrene butadiene rubber, specially formulated for use with cement formulations.

  • CC SYNTHETIC FIBRILLATED MESH FIBER

    0 out of 5
     250

    CC FF is a Synthetic Fibrillated Mesh Fiber for concrete reinforcement that complies with Standard Specifications for Fiber Reinforced Concrete and Shotcrete, and is specifically designed to help mitigate the formation of shrinkage cracking in concrete. Typically used at a dosage of 0.9 kg/m3, CC FF have been shown to greatly reduce shrinkage cracking by as much as 83% when compared to plain concrete.