• Menu
  • Categories
My Account Checkout

CC FLOOR HARDENER

CC TILE GROUT ₹ 35
CC COLLOIDAL SILICA CONCRETE FINISHING AID - SLAB ASSIST ₹ 16,000

₹ 520

A RANGE OF IMPACT AND ABRASION RESISTANT OXIDISING AND NON-OXIDISING
METALLIC FLOOR HARDENERS.

A range of metallic and non-metallic floor hardening compounds based on well graded metallic and non-metallic aggregates, activating chemicals and selected Portland cements. This range of high quality compounds are for use in industrial concrete flooring to produce impact resisting, abrasion resisting, dust free surfaces which withstand spillages of oil, grease and certain industrial chemicals. Available in two types: They are used as a troweling in grade(broadcast or dry shake on green concrete) or as a thickness grade for incorporating the total thickness of the topping.
CC floor hardener hd

The general purpose product based on non-oxidising metallic aggregate used to produce an impact and wear resistant, dust free surface suitable for most heavy duty industrial situations, such as warehouses, car parks, garages and machine showrooms etc. Can be used in areas subject to constant wetting down either indoors or outdoors. This is not affected by oil/grease spillages and offers a non-slip surface.

CC florhardener gp
Based on non-metallic aggregate for locations and industries where it is important that the floor be free of any ferrous content but a high degree of durability is essential. For light to medium duty areas such as walk a ways, shopping centers, etc.

Clear
SKU: 000040-1-1-1-1-1-1-1-2 Categories: , , ,

Additional information

Product Description

A RANGE OF IMPACT AND ABRASION RESISTANT OXIDISING AND NON-OXIDISING
METALLIC FLOOR HARDENERS.

A range of metallic and non-metallic floor hardening compounds based on well graded metallic and non-metallic aggregates, activating chemicals and selected Portland cements. This range of high quality compounds are for use in industrial concrete flooring to produce impact resisting, abrasion resisting, dust free surfaces which withstand spillages of oil, grease and certain industrial chemicals. Available in two types: They are used as a troweling in grade(broadcast or dry shake on green concrete) or as a thickness grade for incorporating the total thickness of the topping.
CC floor hardener hd

The general purpose product based on non-oxidising metallic aggregate used to produce an impact and wear resistant, dust free surface suitable for most heavy duty industrial situations, such as warehouses, car parks, garages and machine showrooms etc. Can be used in areas subject to constant wetting down either indoors or outdoors. This is not affected by oil/grease spillages and offers a non-slip surface.

CC florhardener gp
Based on non-metallic aggregate for locations and industries where it is important that the floor be free of any ferrous content but a high degree of durability is essential. For light to medium duty areas such as walk a ways, shopping centers, etc.
Usage

PRIMARY USES
CC floorhardner is designed to increase the durability and impact resistance of
industrial and commercial concrete floors. CC florhardner can be used either by the
dry shake method or incorporated into the concrete mix as a monolithic topping.

CC floorhardner provides one of the hardest wearing impact resistant non-dusting
floor surface in the following typical locations:
*Engineering Workshops * Warehouses
*Laboratories * Power Stations
*Loading Bays * Abattoirs
*Garages * Bakeries
*Subways * Car Parks
*Breweries * Refineries Desalination Plants
*Factories * Agricultural Buildings, etc.
Dosage / Coverage/Yield

DIRECTIONS FOR USE
Base Concrete: the base concrete should be designed to have a minimum cement content of 350kilo per cubic metre, with water cement ratio being kept to a minimum to produce zero slump. The base concrete should be placed in accordance with good concrete practice. Particular care should be exercised at bay edges and comers to ensure good compaction.

Method of Application-Dry Shake Method: CC floor hardener should be applied when the base concrete is sufficiently firm to take the weight of both workman and power float and leaving foot prints no greater than 3mm in depth. It is essential that no free standing water is evident. Do not delay application when this point has been reached.
Broadcast the CC floor hardener in two equal stages. Firstly, apply at the rate of 3.5kg.per.m². Carry out the first power or hand trowel and then repeat the operation, but broadcast the second stage at right angles to the first. Ensure that the first stage is completely troweled in before continuing with the second stage.
Properties

Typical properties of CC floor hardener are as follows:
Colour : Dark Grey
Hardness : 7 on MOH’s scale
Storage Life : Upto 2 years when stored in accordance with manufacturer’s instructions.
Flash Point : Not applicable
Shelf Life

ACI Manual of Concrete Practice Part 1.
ACI 201 and 2R77 Guide to Durable Concrete Section 3,4,6. Recommendations for obtaining abrasion resistant concrete surface.
BS CP204 situ floor finishes
BS 1047. BS 3900 Part F4.
Weight

40 Kg

Related products

  •

    CC MICRO CONCRETE

    0 out of 5
    ₹ 300

    A specially prepared ready to use grey powder which requires addition of water only
    on site, to produce a free flowing, high strength concrete which has micro fine
    aggregates and ability to penetrate into the recesses of concrete members and
    behind the reinforcement of the member under repair.

    Select options
    Quick View

  • Probutyl

    0 out of 5
    ₹ 1,750

    Butyl tape uses butyl rubber and poly isobutylene as main raw materials and reconciles, squeezes into steps, covered with isolation paper. And coil it into roll shape. Through these steps, butyl tape is finished. Butyl sealant tape contains two types, one is single sided butyl tape, and the other is tape contains two types, one is single sided butyl tape, and the other is double sided butyl tape.

    NON-WOVEN
    High quality butyl rubber coated with various types of non-woven fabrics. Different sizes and colors are available. Non-woven fabric butyl tape coated over the entire width. It is a perfect solution as a seal at the bottom of windows or additional corner insulation. Thanks to the butyl, the possibility of forming the connections definitely increases while very good tightness and ease of installation is maintained.

    ALUMINUM
    Single sided butyl tape in which tape coated with a layer of aluminum on one side and butyl on the other side.

    Select options
    Quick View

  • MAXSHIELD PF 950

    0 out of 5
    ₹ 12,025

    (WATEBASED PU >450% elongation)

    Polyurethane based, liquid applied single component, UV stable elastomeric waterproofing membrane with high elongation properties.

    Select options
    Quick View

  • CC TILO

    0 out of 5
    ₹ 260

    POLYMER BASED TILE ADHESIVE
    CC tilo is blend of Portland cements, polymers and fillers.

    Select options
    Quick View