• Menu
  • Categories
My Account Checkout

CC SBR LATEX

CC ANTI RUST ₹ 300
CC GROUT ₹ 260

₹ 235

It is polymer based on styrene butadiene rubber, specially formulated for use with cement formulations.

Clear
SKU: 000040-1-1-1-1-1-1-1 Categories: , , , , ,

Additional information

Product Description

It is polymer based on styrene butadiene rubber, specially formulated for use with cement formulations.
Usage

For structural rehabilitations.
For waterproofing treatment.
For floor, screeds & topping.
For concrete repairs.

DIRECTIONS FOR USE
for structural repairs and rehabilitation of concrete structures.
Reach the sound concrete and clean reinforcements with wire brush to remove loose scales.
Clean with jet of water to remove loose particles, dust etc.,
Apply passivator coat: 1 part cement: 1 part CC SBR latex, coat on cleaned reinforcement and allow it to dry for 2-3 hours.
Dosage / Coverage/Yield

Coverage : 7 to 8m² of reinforcement area per litre of CC SBR latex.
Apply BOND COAT – 1 Part cement 1 part CC SBR latex on entire surface that is to
receive subsequent CC SBR latex modified mortar.
Coverage : 2 to 3m² per litre of CC SBR latex.
Prepare polymer modified mortar : Cement 50 kg, 125kg zone II sand, 1- litre CC
SBR LATEX, Water 5 to 7 litre. Apply this by hand pressing over tacky bond coat.
Yield is 0.1m3 Above mix cover 10m3 area at 10mm thickness.
Shelf Life

24 months if stored in manufacturer’s sealed packs in a cool and dry place away from moisture and heat. Agitate before use after prolonged storage.
Properties

For CC SBR latex & modified mortar
Advantages

Advantages of CC SBR latex system. Excellent adhesive to reinforcement & concrete. Increased flexural strength. Increased tensile strength. Compressive strength comparable to that of concrete. Reduced shrinkage. Reduced water permeability. Improved chemical resistance
Size

1 Litre, 20 Litres, 5 Litres

Related products

  •

    MAXTREAT LAMINATE

    0 out of 5
    ₹ 74,750

    Carbon Fibre laminates for structural strengthening with high performance & high strength

    Select options
    Quick View

  • Probutyl

    0 out of 5
    ₹ 1,750

    Butyl tape uses butyl rubber and poly isobutylene as main raw materials and reconciles, squeezes into steps, covered with isolation paper. And coil it into roll shape. Through these steps, butyl tape is finished. Butyl sealant tape contains two types, one is single sided butyl tape, and the other is tape contains two types, one is single sided butyl tape, and the other is double sided butyl tape.

    NON-WOVEN
    High quality butyl rubber coated with various types of non-woven fabrics. Different sizes and colors are available. Non-woven fabric butyl tape coated over the entire width. It is a perfect solution as a seal at the bottom of windows or additional corner insulation. Thanks to the butyl, the possibility of forming the connections definitely increases while very good tightness and ease of installation is maintained.

    ALUMINUM
    Single sided butyl tape in which tape coated with a layer of aluminum on one side and butyl on the other side.

    Select options
    Quick View

  • CC PROOF

    0 out of 5
    ₹ 100

    “LIQUID INTEGRAL WATERPROOFING COMPOUND
    Helps in achieving water tight concrete and waterproof cement sand mortar and plasters”

    Select options
    Quick View

  • MAXTREAT PRIMER

    0 out of 5
    ₹ 1,820

    Epoxy resin based primer for fibre reinforcement systems.

    Select options
    Quick View