Acrylic Hydrophilic Waterstop

 3,500

Hydrophilic Waterstop Tape, Plugs And Rings

Pronil ACR is a new generation high performance acrylic polymer based expanding tape. It expands up to 900% when in contact with water. In a totally dry state, Pronil ACR will shrink to it’s original installation dimension and re-expand on wetting. Pronil ACR is used in concrete construction for the sealing of construction joints including wall to base connections, pipe entry systems, sealing of openings and interface sections between existing and new concrete. Pronil ACR is easily stored in it’s original moisture-proof wrap in cool, dry conditions away from sunlight.

Clear
SKU: 000040-1-1-1-1-1-1-1-3-1-1-2-1 Categories: , ,

Additional information

Product Description

Hydrophilic Waterstop Tape, Plugs And Rings

Pronil ACR is a new generation high performance acrylic polymer based expanding tape. It expands up to 900% when in contact with water. In a totally dry state, Pronil ACR will shrink to it’s original installation dimension and re-expand on wetting. Pronil ACR is used in concrete construction for the sealing of construction joints including wall to base connections, pipe entry systems, sealing of openings and interface sections between existing and new concrete. Pronil ACR is easily stored in it’s original moisture-proof wrap in cool, dry conditions away from sunlight.

Features/Advantages

Advantages
Conformable, can be used on a variety of irregular substrates.
Forms an impermeable barrier against water in concrete.
Excellent compliance with deformed surfaces and joints.
Saves time and labour.
Easy to apply.
Simple overlap jointing on site.
No hardening time required.
No welding required.
Swells in salt water.

Size

20mm x 5mm x 10m Roll, 20mm x 5mm x 20m Roll

Properties

Technical Data
The increase in volume was measured when specimens were immersed in tap water at 23°C over a 28 day period. Recovery volume was measured when the specimens were removed from the solution and air dried over a 28 day period. This method was repeated over three cycles. The percentage change in volume calculations are all based on the initial volume.

Application Temperature: -10°C / 50°C
Density: 1,40 g/cm3
Shore: 50
The expansion rating is affected according to CaCO3 and salt content. Contains no traces of Bentonite

This product has been tested by
BBA (British Board of Agrément)
BBA Test No: T1-61007

Usage

Pronil water activated, self-expanding waterstops create a perfect, active seal around formwork spacers, center pens and tie rods.