• Menu
  • Categories
My Account Checkout

CC GROUT

CC SBR LATEX ₹ 235
CC TILO ₹ 260

₹ 260

HIGH STRENGTH, NON-SHRINK, FREE FLOWING, EXPANSIVE GROUT

A specially prepared ready to use grey powder which requires addition of water
and CC Bond Repair on site, to provide.

Clear
SKU: 000040-1-1-1-1-1-1-1-1 Categories: , , , ,

Additional information

Product Description

HIGH STRENGTH, NON-SHRINK, FREE FLOWING, EXPANSIVE GROUT

A specially prepared ready to use grey powder which requires addition of water and CC Bond Repair on site, to provide.
Usage

A free flowing non-shrink rheoplastic grout with a wide range of applications. Primary use is for high strength grouting where complete filling of voids is needed with a material which will continue to fill at the time of hardening; for grouting and fixing of heavy machinery, bearing plates, anchor bolts, dowel bars, crane rails etc.
Shelf Life

STORAGE
Being cement based CC Grout should be stored in the same manner as cement in cool and dry conditions. Storage life is approximately 12 months.
Properties

Water Addition : Flowable consistency water /
grout ratio 0.17 to 0.18
Plastic consistency water / grout
ratio: 0.16 to 0.17
Density :Flowable 2170 kg / m²
Free Expansion: 2 to 4% in the plastic state
Water Absorption Less than 2% Restrained
Expansion : Greater than zero, but not more
than 0.4% Mechanical
Special Attributes: CC Grout is a high strength
precision grouting material
The CC GROUT
 Reduced coefficient of creep
 Increased strength when fully restrained.
 Increased bond strength.
 Superior work ability.
 High compressive, tensile and flexural strength.
Yield Economy
Approximately 28 liters per 50kg sack (0.028 cu. Mt per sack)
CC GROUT is Economical when compared with other grouts because of its
higher yield. In less demanding situation further cost reduction is possible by
mixing clean and sound 1.0mm and down aggregates with CC GROUT in the
proportion of 1:1 by volume with reduced flow.
Advantages

High Early & Ultimate Strength: Reaches strength as specified in CRD – C – 621 –
83 for 7 days in 24 hours and 28 days in 72 hours. Ultimate strength in excess of
600 kg / cm².
Non-Shrink : Eliminates shrinkage commonly encountered in both plastic and
hardened phases.
Predictable Performance : All solid ingredients are precision mixed in the factory
facilitating controlled quality on-site
Impermeable: Dense grout, resistant to oil and water penetration.
Non-Ferrous : Contains no ferrous metal and therefore will not corrode the
anchor bolts & base plates.
Chloride Free : Predictable high early and ultimate strength without use of
chlorides
Pumpable : Easily pumped; due to its micro cellular material structure, it does
not put excessive wear on pump equipment.
CC GROUT is free from sulphates, Phosphates and Nitrates.
Specification

ASTM C 827-78, ASTM C 387-77A, CRD-C-81-7A, BS 5383 PART 2 1980 E CRD – C621-1983, ASTM C 878
Weight

20 kgs

Related products

  •

    MAXSHIELD PF 950

    0 out of 5
    ₹ 12,025

    (WATEBASED PU >450% elongation)

    Polyurethane based, liquid applied single component, UV stable elastomeric waterproofing membrane with high elongation properties.

    Select options
    Quick View

  • MAXTREAT PRIMER

    0 out of 5
    ₹ 1,820

    Epoxy resin based primer for fibre reinforcement systems.

    Select options
    Quick View

  • CC CURE WB

    0 out of 5
    ₹ 1,000

    WATER BASED CONCRETE COMPOUND

    The CC cure wb water based concrete curing compounds are liquid membrane type
    materials, available in several grades for specific purposes, as detailed above. All
    grades are basically composed of low viscosity wax emulsion, which incorporate a
    special alkali reactive emulsion braking system.

    Select options
    Quick View

  • CC SBR LATEX

    0 out of 5
    ₹ 235

    It is polymer based on styrene butadiene rubber, specially formulated for use with cement formulations.

    Select options
    Quick View