CC ANTI RUST

 300

Water based Chemical release agent suitable for pretreatment of metal before applying any coating. On application of CC anti rust rusted surface gets cleaned easily and safely and leaves behind it an anticorrosive thin film of zinc on the treated surface. CC anti rust can be applied by brush.

Clear

Additional information

Product Description

Water based Chemical release agent suitable for pretreatment of metal before applying any coating. On application of CC anti rust rusted surface gets cleaned easily and safely and leaves behind it an anticorrosive thin film of zinc on the treated surface. CC anti rust can be applied by brush.

Usage

DIRECTIONS FOR USE
Shake well the container before opening. Apply it over the rusted surface liberally. Allow it to react for minimum sixty minutes. Anti rust reacts with the rust. Rub the surface with wire brush. After the rust comes out from the surface anti rust leaves out a white anticorrosive layer. Do not washout this layer, as it does not affect the subsequent coatings.

Dosage / Coverage/Yield

COVERAGE
10 to 20 rmt & bars per litre or 3-4 m2 per litre on metal surface.

Shelf Life

12 months if stored below 350C.

Properties

Nature : One component, Liquid.
Colour : Light Green
Ph : Acidic
Viscosity : 12 + 2 Seconds
By B-4 Ford Cup at 250C
Specific Gravity : 1.28 + 0.03
Maturation Time : 5-10 mints.

Advantages

Easily applicable by brush.
Does not contain flammable / inflammable solvent.
It penetrates through rust to the bare body and loosens the rust from the metal completely.
Greatly reduces the manpower/work time.
Economical and eco-friendly.
Provides thin anticorrosive film of zinc on the treated surface

Weight

3 Kgs