• Menu
  • Categories
My Account Checkout

CC REPAIR MORTAR

CC CURE WB ₹ 1,000
CC MICRO CONCRETE ₹ 300

₹ 40

NON-SHRINK, HIGH STRENGTH REPAIR MORTAR

CC repair mortar is specially formulated repair mortar designed to fully meet the
requirement of effectively repairing cracks in plasters , avoiding the use of costly
sealants and putties. CC repair mortar is a dry powder when mixed with water it
forms a creamy consistency mortar which is ready for use in repairing cracks and
repairing plasters, CC repair mortar is reinforced with alkali resistant fibers.

Clear
SKU: 000040-1-1-1 Categories: , , , ,

Additional information

Product Description

NON-SHRINK, HIGH STRENGTH REPAIR MORTAR

CC repair mortar is specially formulated repair mortar designed to fully meet the
requirement of effectively repairing cracks in plasters , avoiding the use of costly
sealants and putties. CC repair mortar is a dry powder when mixed with water it
forms a creamy consistency mortar which is ready for use in repairing cracks and
repairing plasters, CC repair mortar is reinforced with alkali resistant fibers.
Usage

CC repair mortar is ideally suited for repairing for superficial plaster cracks. CC repair mortar can be used for repairing ceiling cracks and plasters with ease because of its viscosity. cracks arising due to plasters cracking at junctions of wall and column or brick work and soffit beam can be effectively sealed. Cracks at parapet wall junction and roof slabs are also sealed with CC repair mortar. The product suitable for rendering.

DIRECTION OF USING :
Preparation: It is essential that the surface of the concrete to be repaired is sound, clean and uncontaminated. Chase the crack and form a neat “V” shaped grooves at least 6mm wide on surface. Damaged plasters can be cut out in more or less square sides. Defective material must be removed carefully using reducing tools, needle gun or sharp tools and chipping hammers. Force must not be applied, as it will damage the sound material beneath.

MIXING
Just add water to CC repair mortar by volume in water/powder ratio of 1: 3 volumes of and mix thoroughly to get an even consistency mortar. In demanding situations CC repair mortar can be used to replace water and the same can be used for priming the surfaces before application of CC repair mortar. Whereas, mixing by trowel is suitable for small mixes, it is recommended that an efficient mechanical
mixer be used.

CURING
Start curing after the material has sufficiently hardened for two days and then allow drying out slowly i.e. protect from rapid drying due to wind, sun or excessive heat). Use of curing compound is ideal in repairs.
Dosage / Coverage

COVERAGE:
In crack repair 1 kg of repair mortar repairs 11 linear feet of crack chased to a width of 6mm and a depth of 3mm. In rendering 60 kg of repair mortar covers 100sq.ft of area to a thickness of 2mm.
Shelf Life

At least 12 months in manufacturer’s sealed drums. Protect from frost, store above 5ºC. Stir pigmented compounds before use. Protect the drum from direct exposure to sun.
Properties

FORM : Free Flowing light white powder
Bulk Density : 1600 Kgs/m²
Application thickness : 1 mm to 20 mm
Pot Life : 60 minutes at 20ºC
Advantages

CC repair mortar replaces costly sealant and putties. It is non-shrink, hence possibility of shrinkage cracks are non exist. It has high tensile strength and good adhesion property. The finish achieved is sufficiently smooth. Good resistance to freeze / thaw cycles, carbonation and attack by chlorides. Conventional curing is not required.
Weight

1 Kg

Related products

  •

    MAXGROUT E10

    0 out of 5
    ₹ 700

    Low viscous solvent free epoxy resin injection grout designed for grouting of gap widths<10mm

    Select options
    Quick View

  • Probutyl

    0 out of 5
    ₹ 1,750

    Butyl tape uses butyl rubber and poly isobutylene as main raw materials and reconciles, squeezes into steps, covered with isolation paper. And coil it into roll shape. Through these steps, butyl tape is finished. Butyl sealant tape contains two types, one is single sided butyl tape, and the other is tape contains two types, one is single sided butyl tape, and the other is double sided butyl tape.

    NON-WOVEN
    High quality butyl rubber coated with various types of non-woven fabrics. Different sizes and colors are available. Non-woven fabric butyl tape coated over the entire width. It is a perfect solution as a seal at the bottom of windows or additional corner insulation. Thanks to the butyl, the possibility of forming the connections definitely increases while very good tightness and ease of installation is maintained.

    ALUMINUM
    Single sided butyl tape in which tape coated with a layer of aluminum on one side and butyl on the other side.

    Select options
    Quick View

  • CC GUARD EX

    0 out of 5
    ₹ 900

    ACRYLIC CO POLYMER BASED HARD WEARING WATERPROOF COATING
    CC guard ex is a ready to use two pack (white liquid and a pack grey cementitious
    powder) protective and waterproof coating membrane.

    Select options
    Quick View

  • CC CURE WB

    0 out of 5
    ₹ 1,000

    WATER BASED CONCRETE COMPOUND

    The CC cure wb water based concrete curing compounds are liquid membrane type
    materials, available in several grades for specific purposes, as detailed above. All
    grades are basically composed of low viscosity wax emulsion, which incorporate a
    special alkali reactive emulsion braking system.

    Select options
    Quick View