Repair & Rehabilitation

Repair & Rehabilitation Products, Cementitious Product like Grouts, Micro Concrete, Patching Mortar, Resin Product like Bonding Coating, Putty, Repair Mortar.

Cementitious products comprise the glue that holds concrete together. These materials include traditional cement and other cementitious materials, such as fly ash, ground granulated blastfurnace slag (GGBS), limestone fines and silica fume.

Excellent adhesion on the substrate is a key requirement for most coating systems. The quality of the substrate-coating interface, and by that the adhesion strength, is governed by the combination of the quality of the paint, the condition of the substrate, the application process and film formation.

Flexible Cementitious Waterproofing System is a two part cement based polymer modified highly flexible, elastic waterproofing coating. Its resilient property makes it suitable to take care of linear movement of the concrete surface due to expansion and contraction.

Bonded coatings form a continuous, dry and adherent friction-reducing lubricant layer on your materials and components. While oils and greases may drip off the friction point, with bonded coatings the surroundings remain clean, which is a particularly important benefit when it comes to hygiene and safety requirements. Bonded coatings can also be used at temperatures exceeding 300 °C.

  • BS 66

    0 out of 5
     351

    Single component polymer modified fibre re-inforced cementitious repair mortar

  • CC ANTI RUST

    0 out of 5
     300

    Water based Chemical release agent suitable for pretreatment of metal before applying any coating. On application of CC anti rust rusted surface gets cleaned easily and safely and leaves behind it an anticorrosive thin film of zinc on the treated surface. CC anti rust can be applied by brush.

  • CC GROUT

    0 out of 5
     260

    HIGH STRENGTH, NON-SHRINK, FREE FLOWING, EXPANSIVE GROUT

    A specially prepared ready to use grey powder which requires addition of water
    and CC Bond Repair on site, to provide.

  • CC MICRO CONCRETE

    0 out of 5
     300

    A specially prepared ready to use grey powder which requires addition of water only
    on site, to produce a free flowing, high strength concrete which has micro fine
    aggregates and ability to penetrate into the recesses of concrete members and
    behind the reinforcement of the member under repair.

  • CC REPAIR MORTAR

    0 out of 5
     40

    NON-SHRINK, HIGH STRENGTH REPAIR MORTAR

    CC repair mortar is specially formulated repair mortar designed to fully meet the
    requirement of effectively repairing cracks in plasters , avoiding the use of costly
    sealants and putties. CC repair mortar is a dry powder when mixed with water it
    forms a creamy consistency mortar which is ready for use in repairing cracks and
    repairing plasters, CC repair mortar is reinforced with alkali resistant fibers.

  • CC SBR LATEX

    0 out of 5
     235

    It is polymer based on styrene butadiene rubber, specially formulated for use with cement formulations.

  • MAXGROUT E10

    0 out of 5
     700

    Low viscous solvent free epoxy resin injection grout designed for grouting of gap widths<10mm

  • MAXTREAT FIBRENET C

    0 out of 5
     47,125

    Carbon fibre reinforcement system for structural strengthening & seismic retrofitting with high performance & high strength.

  • MAXTREAT FIBRENET G

    0 out of 5
     21,125

    Glass fibre reinforcement system for structural strengthening & seismic retrofitting with high performance & high strength.

  • MAXTREAT GLUE

    0 out of 5
     1,430

    Thixotropic epoxy adhesive for carbon fibre FRP laminate system.

  • MAXTREAT LAMINATE

    0 out of 5
     74,750

    Carbon Fibre laminates for structural strengthening with high performance & high strength

  • MAXTREAT PRIMER

    0 out of 5
     1,820

    Epoxy resin based primer for fibre reinforcement systems.